The APTIV™ 1102 range of films are 20% mineral filled, semi-crystalline films manufactured from VICTREX™ PEEK polymer, developed to support engineers designing for ultra-high performance environments where dimensional stability and mechanical robustness are critical. Positioned within the broader APTIV film portfolio, the 1102 range provides an optimized material solution where enhanced stiffness and thermal stability are required beyond unfilled film grades.

APTIV films represent a versatile range of high-performance thermoplastic films that can enable reduced system costs, improved component reliability, and greater design freedom. The APTIV 1102 range combines high temperature capability with mechanical strength, durability, and excellent resistance to radiation, hydrolysis, and aggressive chemicals. The films also deliver electrical insulation, excellent barrier performance with high purity, low moisture absorption, and favourable flammability performance without the use of flame retardants, while maintaining low toxicity of combustion products.

Compared with the APTIV 1000 series, the mineral filled structure provides higher modulus and a lower coefficient of linear thermal expansion, supporting applications that demand improved dimensional control under thermal and mechanical load.

Request a quote Download PDF

Material Properties
Physical	Nominal Value	Unit	Test Method
Density (23°C)	1.45	g/cm³	ISO 1183
Water Absorption¹ (Equilibrium, 23°C, 0.0500 mm, 50% RH)	0.080	%	ISO 62
Shrinkage MD² (200°C, 50.0 µm)	< 0.50	%
Shrinkage TD² (200°C, 50.0 µm)	< 0.50	%
Films	Nominal Value	Unit	Test Method
Film Thickness - Recommended / Available	12 to 125 µm
Tensile Modulus			ISO 527-3
MD : 23°C, 25 µm	5000	MPa
TD : 23°C, 25 µm	4500	MPa
MD : 23°C, 50 µm	4800	MPa
TD : 23°C, 50 µm	4300	MPa
MD : 23°C, 100 µm	4500	MPa
TD : 23°C, 100 µm	4200	MPa
Tensile Stress			ISO 527-3
MD : Break, 23°C, 25 µm	100	MPa
TD : Break, 23°C, 25 µm	80.0	MPa
MD : Break, 23°C, 50 µm	100	MPa
TD : Break, 23°C, 50 µm	80.0	MPa
MD : Break, 23°C, 100 µm	100	MPa
TD : Break, 23°C, 100 µm	80.0	MPa
Tensile Elongation			ISO 527-3
MD : Break, 23°C, 25 µm	> 100	%
TD : Break, 23°C, 25 µm	> 10	%
MD : Break, 23°C, 50 µm	> 100	%
TD : Break, 23°C, 50 µm	> 10	%
MD : Break, 23°C, 100 µm	> 100	%
TD : Break, 23°C, 100 µm	> 10	%
Trouser Tear Resistance³			ISO 6383-1
MD : 50 µm	6.00	N/mm
TD : 50 µm	7.00	N/mm
Puncture Resistance (23°C, 50.0 µm)	5	kJ/m²	Internal Method
Thermal	Nominal Value	Unit	Test Method
CLTE - Flow ⁴ (0.0500 mm)	3.5E-5	cm/cm/°C	ASTM D696
Thermal Conductivity			ASTM E1461
--⁵	0.43	W/m/K
--⁶	0.91	W/m/K
Electrical	Nominal Value	Unit	Test Method
Volume Resistivity⁷ (23°C, 50 µm)	1.0E+16	ohms·cm	ASTM D257
Dielectric Strength⁸ (23°C, 50 µm)	200	kV/mm	ASTM D149
Dielectric Constant (23°C, 50 µm, 10 MHz)	3.6		ASTM D150
Dissipation Factor (23°C, 50 µm, 10 MHz)	1.0E-3		ASTM D150

Notes

¹24 hrs

²TM-VX-84

³23°C

⁴below Tg

⁵Through Plane

⁶In-Plane

⁷100 V

⁸0.25 inch electrode